 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| celduc(R) r e l a i s S/CON/SCI0100600/B/07/03/07 PRELIMINARY DATA Page 1/5 UK IGBT BASED DC SOLID-STATE RELAY SCI0100600 Latest high voltage IGBT technology generation. New innovative isolated driver ensuring fast power transistor turn on and off therefore low power transient. Ultra low output leakage current Low control current consumption Triggered control input to avoid linear control risks Low conducted and radiated disturbances Control voltage range Max transient peak voltage Advised max. DC Mains peak voltage Max. Load Current (with heatsink) Connections M3 round tabs M5 round tabs Dimensions (WxHxD) 44.5 x 58.2 x 27 4.5-32VDC 600V 350VDC 100ADC Weight DC Mains voltage range 350VDC Max Advised (Depends on protection clamping voltage) Load current range (with heatsink) Control input voltage range In & case / Out Insulation 0 to 100A 4.5-32VDC 4kV Fig. 2 (mm) 100g Fig. 1 HIGH SIDE WIRING DIAGRAM (Load connected to "-") LOW SIDE WIRING DIAGRAM (Load connected to "+") Please consult us to select the right protective components C1, D1 & D2. The red paths (C1/D1/D2) must be as short as possible ! Please consult us to select the right protective components C1, D1 & D2. The red paths (C1/D1/D2) must be as short as possible ! Fig. 3 INTERNAL DIAGRAM Proud to serve you Data given at Tambient=25C and subject to modification without previous notice r celduc e l a i (R) s celduc(R) r e l a i s S/CON/SCI0100600/B/07/03/07 PRELIMINARY DATA Page 2/5 UK CONTROL INPUT CHARACTERISTICS CHARACTERISTIC LABEL Ucnom Icnom Uc Ic Ucoffmax -Ucmax Rin VALUE 12-24VDC 35mADC 4.5 - 32VDC 25 - 42mADC 1VDC 32VDC Current limitation typical=4.3V See curve Typical= 3.5V INFO. Fig. 4 Ic (mADC) 45 40 35 30 25 20 15 10 5 0 0 2 4 6 8 CONTROL CURRENT vs. CONTROL VOLTAGE INPUT CIRCUIT Nom. Control voltage Nom. Control current Control voltage range Control current consumption Releasing control voltage Max. reverse control voltage Input impedance @25C -Icmax <100A 10 12 14 16 18 20 22 24 26 28 30 32 Uc (VDC) See curve TIME CHARACTERISTICS CHARACTERISTIC LABEL ton tdon toff tdoff F(on-off) VALUE 10s 600s 10s 100s 700Hz TIME CHARACT. Turn on time Turn on delay Turn off time Turn off delay Max. On-Off frequency POWER OUTPUT CHARACTERISTICS CHARACTERISTIC Mains voltage range Non-repetitive peak voltage Overvoltage protection Off-state max reverse voltage drop (internal diode) Maximum nominal currents Max. non-repetitive peak current LABEL Ut Utp D1 -Ut Ie max Iepeak Iemin Ielk max VCEsat Cout Rthjc Rthra Tthra Uimp Uimp Uimp Rio Cio Tjmax Tstg Tamb Tc 1.35V @Tj=25C 300pF 0.385K/W 10K/W 10 minutes 4kV 4kV 4kV 1G <8pF 175C -40->+100C -40->+90C 100C See fig. 9 @Tra=75C @Tra=60C Resistive 100A Switch OFF D<1% Switch OFF Fmax VALUE Min = VCEsat Max (Advised) = 350VDC INFO. Depends on protection clamping voltage (D1) Ue 600V Not integrated A voltage clamping mean must be connected across the terminals 1 & 2 (see fig 1 & 2) Please consult us to select the right protective components 1.4V Motor Please contact us ON-state @Ie=100A See fig. 9 @Tc=100C @Tj=175C @Utp (See POWER CIRCUIT 100A 100A 0mA 1mA 550A fig. 8) Min. load current Max. leakage current Max. on-state resistance Typ. output capacitance Junction/case thermal resistance Built-in heatsink thermal resistance vertically mounted Heatsink thermal time constant Control inputs/power outputs insulation voltage Inputs/case insulation voltage Outputs/case insulation voltage Isolation resistance Isolation capacitance Maximum junction temperature Storage ambient temperature Operating ambient temperature Max. case temperature @Utp @Tjmax 1.45V @Tj=125C @Iemax @Utp celduc(R) r e l a i s S/CON/SCI0100600/B/07/03/07 PRELIMINARY DATA Page 3/5 UK OUTPUT SWITCH CHARACTERISTIC CURVES Fig. 5 140 Ie (A) 120 100 80 60 40 20 0 0 0,2 0,4 0,6 0,8 1 1,2 1,4 1,6 1,8 2 Tj = 25C Tj = 125C Tj = 175C VCEsat (V) VOLTAGE DROP VS LOAD CURRENT Fig. 6 -Ie (A) REVERSE VOLTAGE DROP VS REVERSE CURRENT 200 150 100 Tj=125C 50 -Ut (V) 0 0 0,5 1 1,5 2 Fig. 7 0,18 0,16 0,14 0,12 0,1 0,08 0,06 0,04 0,02 0 0,0001 POWER ELEMENT TRANSIENT THERMAL IMPEDANCE vs. PULSE DURATION Zthjc (K/W) Fig. 8 700 ON-STATE PEAK OVERLOAD CURRENT vs. PULSE DURATION Ie (Apk) 600 500 D=50% D=20% D=10% D=5% D=2% D=1% Single pulse 0,001 0,01 0,1 t (s) 1 Non-repetitive D=1% (Tc=100C, Tjm ax=175C) 400 300 200 100 Repetitive D=50%(Tc=100C, Tjmax=125C) 0 0,0001 0,001 0,01 0,1 Pulse 1 Duration (s) Fig. 9 Permanent current Ie (ARMS) POWER DISSIPATED AND LOAD CURRENT LIMIT VS TEMPERATURE Please refer to the installation notice for precautions about mounting the device on a heatsink. 2.1K/W 1.2K/W 1.1K/W 0.9K/W 0.75K/W 0.55K/W 0.3K/W 0.2K/W 0.1K/W Power dissipated Pd (W) 110 2.2K/W 160 145 131 116 102 87 100 90 80 70 60 50 40 30 20 10 0 0 8K/W 4K/W 72.5 58 43.5 29 14.5 0 20 30 40 50 60 70 80 90 Ambient temperature (C) 10 100 110 10K/W = No Heatsink / 1LD12020 4K/W = 150x150x3mm aluminium sheet 2.1K/W = WF210000 1.2K/W = WF121000 1.1K/W = WF131100 0.55K/W = WF050000 0.3K/W = WF031100 0.2K/W = No reference 2.2K/W = WF262100 / WF151200 0.9K/W = WF115100 0.75K/W = WF070000 0.1K/W = No reference celduc(R) r e l a i s S/CON/SCI0100600/B/07/03/07 PRELIMINARY DATA Page 4/5 UK GENERAL INFORMATION CONNECTIONS Connections Screwdriver advised Min and max tightening torque Insulated crimp terminals (round tabs, eyelet type) Display Power PhilipsTM NR2 1.8 N.m M5 Control PhilipsTM NR1 0.8 N.m M3 Green LED (indicates relay has switched ON) UL94V0 2 screws (M4x12mm) No audible noise 100g See mounting sheet MISC. Housing Mounting Noise level Weight STANDARDS GENERAL Standards Protection level Protection against direct touch CE marking UL, cULUS and VDE approvals TYPE OF TEST STANDARD EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-11 IEC60947-1 IP00 None Yes Pending LEVEL Pending Pending Pending Pending EFFECT ? ? No effect ? E.M.C. IMMUNITY E.M.C. EMISSION E.S.D. (Electrostatic discharges) Radiated electromagnetic fields Fast transients bursts Electric chocks Voltage drop Radiated and conducted disturbances NFEN55011 Pending celduc(R) r e l a i s S/CON/SCI0100600/B/07/03/07 PRELIMINARY DATA Page 5/5 UK DIMENSIONS AND ACCESSORIES Fig. 10 DIMENSIONS (mm) 28 22.8 0,5 19.6 O4.7 28 M5 1+ 58.2 43.2 247.6 47.5 3+ 25.8 TOLERANCES: 0.3 25.4 44.5 ACCESSORIES PROTECTIVE COVER 1K470000 Please consult our website for other accessory references (Heatsinks, mounting adaptors, thermal grease...) r celduc(R) e l a i s 5.1 M3 www.celduc.com Rue Ampere B.P. 4 42290 SORBIERS - France Phone : 33 (0) 4 77 53 90 20 Fax : 33 (0) 4 77 53 85 51 Email : celduc-relais@celduc.com |
Price & Availability of SCI0100600
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |